Brother International Innov-ís 1500D Users Manual - English - Page 86
Side Zipper
View all Brother International Innov-ís 1500D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 86 highlights
■ Side Zipper Use for side zippers on skirts or dresses. a Press . * Be sure to select the straight stitch with the middle needle position. SEWING THE STITCHES d Remove presser foot "J", and then attach the presser foot holder to the pin on the right side of zipper foot "I". a c b a Right side b Left side c Needle drop point CAUTION • When using zipper foot "I", make sure the straight 3 stitch, middle needle position is selected. Turn the handwheel to make sure the needle does not strike Utility Stitches the presser foot. If another stitch is selected, the needle will strike the presser foot, causing the needle b Attach presser foot "J", sew straight stitches to the zipper opening, and then sew basting stitches to the edge of the fabric. to break and possibly causing injury. e Set the presser foot in the 3 mm (approx. 1/8 inch) margin. a b c d f Starting from the end of the zipper opening, sew to a point about 50 mm (approx. 2 inches) from the edge of the fabric, then stop the machine. g Pull down the zipper slider, then continue sewing to the edge of the fabric. a Basting b End of zipper opening c Reverse stitching d Wrong side of fabric c Press the seam allowance open and align the folded hem along the teeth of the zipper, while maintaining 3 mm (approx. 1/8 inch) of sewing space. a b a b c e d a Zipper pull tab b Zipper teeth c End of zipper opening d 3 mm (approx. 1/8 inch) e Wrong side of fabric a 3 mm (approx. 1/8 inch) b 50 mm (approx. 2 inch) CAUTION • Make sure the needle does not strike the zipper during sewing. If the needle strikes the zipper, the needle may break, leading to injury. 85