Brother International Innov-ís 1500D Users Manual - English - Page 29
Upper Threading
![]() |
View all Brother International Innov-ís 1500D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
LOWER/UPPER THREADING b Guide the bobbin thread through the groove, following the arrow in the illustration. Note • Do not cut the thread with the cutter. • Do not attach the bobbin cover. Upper Threading This section describes how to thread the machine and the needle. The machine is marked with numbers that indicate the threading order. c While lightly holding the upper thread, press the "Needle Position" button twice to lower, then raise the needle. d Gently pull the upper thread to pull up the bobbin thread. → A loop of the bobbin thread comes out from the hole in the needle plate. CAUTION • Be sure to thread the machine properly. Improper threading can cause the thread to tangle and break the needle, leading to injury. • When using accessories not included with this machine, attach the accessory to the machine after threading the machine. 8 12,13 11 10 9 14,15 7 4, 5 6 3 2,16 1 a Turn on the machine. b Press the "Presser Foot Lifter" button to raise the presser foot. → The upper thread shutter opens so the machine can be threaded. a e Pull out about 100 mm of the bobbin thread, and then pass it under the presser foot toward the rear of the machine, making it even with the upper thread. a b a Upper thread b Bobbin thread f Attach the bobbin cover. 28 a Upper thread shutter Memo This machine is equipped with an upper thread shutter, allowing you to check that the upper threading is performed correctly.
![](/manual_guide/products/brother-international-innov237s-1500d-users-manual-english-bcaf2a3/29.png)