Brother International Innov-ís 1500D Users Manual - English - Page 54
Darts Seams
![]() |
View all Brother International Innov-ís 1500D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
SEWING THE STITCHES Memo For a standard 16 mm (approx. 5/8 inch) seam allowance, set the width to 0 mm on the screen. While sewing, align the edge of the fabric with the 16mm (approx. 5/8 inch) mark on the needle plate. J a a 16 mm (approx. 5/8 inch) Darts Seams a Press , and then attach presser foot "J". b Press the "Reverse/Reinforcement Stitch" button to sew reverse stitches at the beginning of the stitching, and then sew from the wide end to the other end without stretching the fabric. * If the automatic reverse/reinforcement stitching setting is selected before sewing, reverse stitches will be sewn at the beginning of the stitching. a ■ Basting 3 a Press , and then attach presser foot "J". Utility Stitches b Press the "Reverse/Reinforcement Stitch" button to sew reinforcement stitches at the beginning of the stitching. a Basting c Without sewing reverse stitches at the end of the stitching, pull out 50 mm (approx. 1-15/ 16 inches) of the threads, cut them, and then tie the two ends together. Memo The stitch length can be set between 5 mm and 30 mm (approx. 3/16 and 1-3/16 inches). a a Between 5 mm (approx. 3/16 inch) and 30 mm (approx. 1-3/16 inches) c Sew while lightly guiding the fabric. d Insert the ends of the thread into the dart with a sewing needle. e Iron the dart to one side. Memo This is easy to do if the foot controller is used ( see page 39). d End the basting with reinforcement stitches. 53
![](/manual_guide/products/brother-international-innov237s-1500d-users-manual-english-bcaf2a3/54.png)