Brother International Innov-ís 1500D Users Manual - English - Page 188

This message is displayed when the motor locks up due to tangled thread or for other reasons related to thread delivery. ERROR MESSAGES This message is displayed when a button on the screen is pressed while the needle is lowered. If data is being written to or deleted from "Removable Disk" on the connected computer during sewing, the machine stops and this message is displayed. When the USB transmission is completed, press the "Start/Stop" button to continue sewing. This message is displayed when the "Reverse/Reinforcement Stitch" button is pressed while the embroidery unit is attached. This message is displayed when is pressed while an incompatible embroidery card is inserted. This message is displayed when you try to retrieve a pattern saved with the number of stitches or the number of colors exceeding the specified limits. This message is displayed when you try to sew with a stitch other than a middle needle position stitch while the single-hole needle plate is installed. This message is displayed when the needle plate is removed with the machine on or when the machine is turned on in the embroidery or embroidery edit mode. This message is displayed when the "Start/Stop" button, "Reverse/ Reinforcement Stitch" button, or the "Thread Cutter" button is pressed while the presser foot is raised. This message is displayed when the machine is set for twin needle sewing and a pattern that cannot be sewn with the twin needle is selected. This message is displayed when the "Start/Stop" button is pressed 8 while the sewing speed controller is set to control the zigzag stitch width. Appendix ■ Alarm If an incorrect operation is performed, the machine beeps two or four times. Memo To turn the alarm on or off, press details, see page 21. . For 187