Brother International PC-8200 Users Manual - English - Page 104
Placing the embroidery unit into its case, Initializing the embroidery unit
View all Brother International PC-8200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 104 highlights
Placing the embroidery unit into its case 1 Hook the embroidery unit onto the tab inside the case. 2 Secure the embroidery unit with the band. 3 Close the cover. 2 1 Initializing the embroidery unit 1. Turn on the power. The following display will appear on the LCD. * When the buttonhole lever, the needle or the presser foot lever are lowered or when the bobbin winding shaft is at the right, an error message will vary depending on which of the conditions mentioned above is occurring. The display shown at left will appear after the error condition has been remedied. 1 6 102 2. Touch the "CHECK" key. The carriage will move in order to initialize the embroidery unit. CAUTION Do not place your hands near the embroidery arm, otherwise injury may result. Furthermore, the embroidery arm may make some noise while initialization is being carried out, but this is normal. If the initialization could not be carried out normally, a buzzer will sound. If this occurs, make sure that the embroidery frame is not attached and try again to initialize the embroidery unit. This is not a malfunction. The types of patterns available will then be displayed on 2 the LCD. 3 1 Alphabetical characters 4 2 One-point patterns 5 3 Frame patterns 4 Floral alphabets 5 Patterns on memory card (option) 6 Touch to position the embroidery arm for removing unit.