Brother International PC-8200 Users Manual - English - Page 17
Bobbin Winding / Bobbin Thread Setting - spool pin
View all Brother International PC-8200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
BOBBIN WINDING / BOBBIN THREAD SETTING Winding the bobbin and setting the bobbin thread 3 2 6 4, 8 5 7 9 1 3 1 2 2 1 1. Connect the machine to the power supply and turn on the main power. 2. Set the thread spool. The thread end should come from the bottom front of the spool. The spool cap closest to the thread spool size should be used to hold the spool securely on the spool pin. 1 Spool cap 2 Spool 3 Spool pin * The spool cap should be pushed on as far as it will go. Note If using a fine thread such as cross wound thread, slightly separate the spool cap (small) from the thread on the spool before using. 1 Cross wound thread 2 Spool cap (small) 3. Guide the thread through the machine and the thread guide for bobbin winding as marked by the dotted line. 15