Brother International PC-8200 Users Manual - English - Page 18
Start/stop - bobbins for
View all Brother International PC-8200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
4. Guide the thread through the small hole in the side of the 2 bobbin from the inside. Place the bobbin on the bobbin winder shaft. While holding the thread end, push the bobbin winder shaft to the right. 1 Spring on the shaft 2 Groove of the bobbin * Align the groove of the bobbin with the spring on the shaft. 1 5. While holding the thread end, press the "START/STOP" button. Wind the thread a few times around the bobbin and press the "START/STOP" button again. Trim the excess thread from the top of the bobbin after the machine stops. 6. Set the speed to maximum. 7. Press the "START/STOP" button. The machine will stop automatically when the bobbin is full. Press the "START/STOP" button to stop at any time or when the bobbin has stopped moving and the motor is still running. 8. Push the bobbin shaft to the left. Remove the bobbin. 9. Set the bobbin into the shuttle as shown on the next page. 16