Brother International PC-8200 Users Manual - English - Page 73
Flat Fell Seam
View all Brother International PC-8200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
FLAT FELL SEAM J Use for reinforcing seams and finishing edges neatly. 1. Attach presser foot "J". Sew the finish line, then cut half of the seam allowance from the side that the flat fell seam will lie. 1 About 1.2 cm (1/2") 2 Reverse side * When the automatic thread cutting and automatic reinforcement stitch are preset, reinforcement stitches will be sewn automatically at the start of sewing. Press the "REVERSE STITCH" button to sew a reinforcement stitch and trim the thread automatically at the finish of sewing. 2. Spread out the fabric along the finish line. 1 Finish line 2 Reverse side 3. Lay both seam allowances to the shorter one's (cut one) side and iron them. 1 Reverse side 4. Fold the longer seam allowance around the shorter one, and sew the edge of the fold. 1 Reverse side 71