Brother International PC-8200 Users Manual - English - Page 157
Always keep the machine clean.
View all Brother International PC-8200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 157 highlights
Always keep the machine clean. 5 1. Turn off the power and remove the presser foot holder and the needle. 2. Loosen the screws. 3 5 3. Remove the needle plate. 1 Needle plate 5 6 1 1 2 12 4. Take out the shuttle. 5. Remove accumulated lint and thread from the inner shuttle and race with a brush or a vacuum cleaner. 1 Race 2 Shuttle 6. Set the shuttle by aligning the shuttle projection with spring of the stopper. 1 Projection 2 Spring * Lint and dust accumulated in the race will sometimes cause poor stitching or malfunction of bobbin thread sensor. 155
155
5
Always keep the machine clean.
1.
Turn off the power and remove the presser
foot holder and the needle.
5
3
1
2.
Loosen the screws.
3.
Remove the needle plate.
1
Needle plate
6
5
2
1
12
4.
Take out the shuttle.
5.
Remove accumulated lint and thread from the
inner shuttle and race with a brush or a
vacuum cleaner.
1
Race
2
Shuttle
6.
Set the shuttle by aligning the shuttle
projection with spring of the stopper.
1
Projection
2
Spring
*
Lint and dust accumulated in the race will
sometimes
cause
poor
stitching
or
malfunction of bobbin thread sensor.