Brother International PC-8200 Users Manual - English - Page 68
Dart Seam
View all Brother International PC-8200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
DART SEAM J 1. Attach presser foot "J". Sew a reverse stitch at the beginning of the dart and then sew from the wide end to the 1 other end without stretching the fabric. 1 Basting * If automatic reinforcement stitching is preset, a reinforcement stitch will automatically be sewn at the sewing start. 2. Do not sew a reverse stitch at end. Cut the thread at the end leaving 5 cm (1-15/16"), and then tie both ends together. 3. Insert the ends of the thread into the dart with a needle. 4. Iron the dart to one side so that it is flat. 66
66
DART SEAM
1
1.
Attach presser foot
“
J
”
. Sew a reverse stitch at the
beginning of the dart and then sew from the wide end to the
other end without stretching the fabric.
1
Basting
*
If automatic reinforcement stitching is preset, a
reinforcement stitch will automatically be sewn at the sewing
start.
2.
Do not sew a reverse stitch at end. Cut the thread at the end
leaving 5 cm (1-15/16
”
), and then tie both ends together.
3.
Insert the ends of the thread into the dart with a needle.
4.
Iron the dart to one side so that it is flat.
J