Brother International PC-8200 Users Manual - English - Page 19
Setting the bobbin
![]() |
View all Brother International PC-8200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Setting the bobbin 1 2 1. Slide open the bobbin cover. 1 Bobbin cover 2 Bobbin cover release button 2. Insert the bobbin into the shuttle with the thread direction as noted in the diagram. 3. Guide the thread end through the slit, then pull the thread toward you to cut off any excess thread. 1 1 Built-in thread cutter 4. Close the bobbin cover by placing the left end in place and pressing down lightly on the right end so that it snaps into place. 1 2 * Sewing can begin without pulling out the bobbin thread. 17
![](/manual_guide/products/brother-international-pc8200-users-manual-english-d6fa2df/19.png)
17
Setting the bobbin
1
2
1
1.
Slide open the bobbin cover.
1
Bobbin cover
2
Bobbin cover release button
2.
Insert the bobbin into the shuttle with the thread direction as
noted in the diagram.
3.
Guide the thread end through the slit, then pull the thread
toward you to cut off any excess thread.
1
Built-in thread cutter
1
2
4.
Close the bobbin cover by placing the left end in place and
pressing down lightly on the right end so that it snaps into
place.
*
Sewing can begin without pulling out the bobbin thread.