Brother International PC-8200 Users Manual - English - Page 48
OVERCASTING When using the side cutter
![]() |
View all Brother International PC-8200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
OVERCASTING (When using the side cutter) 1 2 3 4 5 5 1 Thin and medium fabrics 2 Thick fabric 3 Thick and medium stretch fabric 4 Normal sewing 5 Zigzag stitch By using the side cutter, you can do overcasting while cutting the fabric. If using the side cutter, select the pattern and then touch the " " key. 1. Push the "NEEDLE POSITION" button to raise the needle, and then turn off the power. 2. Raise the presser foot lever. 3. While pressing the black button to the left of the presser foot holder, pull the presser foot holder downward to remove it. 3 5 1 2 4. Set the screw of the needle into the fork of the operating lever. 1 Screw of the needle 2 Operating lever * Make sure that the screw is held firmly by the fork. 3 5 5. With the presser foot raised, align the presser foot holder screw hole directly with the notch in the side cutter, then insert the screw and lightly tighten it. Lower the presser foot lever and firmly tighten the screw. 6. Select the pattern and then touch the " " key. The necessary adjustment for the side cutter will be carried out automatically. 46
![](/manual_guide/products/brother-international-pc8200-users-manual-english-d6fa2df/48.png)