Brother International PC-8500 Users Manual - English - Page 25
Start/Stop, START/STOP button, Foot controller
View all Brother International PC-8500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Setting Up Sewing Utility Stitches Characters and Decorative Stitches Embroidering START/STOP "START/STOP" button 1 Place the fabric under the presser foot, lower the presser foot, and then press the "START/STOP" button. This machine starts sewing. * Hold down the "START/STOP" button to sew at a slow speed. 2. Press the "START/STOP" button to stop this machine. Foot controller 1 2 Note Do not allow fabric pieces and dust to collect in the foot controller. Doing so could cause a fire or an electric shock. 1. With this machine turned off, insert the foot controller plug into its jack on this machine. 1 Foot controller 2 Foot controller jack 2. Turn on this machine, then slowly depress the foot controller to start sewing. * The speed set using the speed range control lever is the foot controller's maximum sewing speed. 3. Release the foot controller to stop this machine. * When the foot controller is being used, the "START/STOP" button has no effect on the sewing. Note (For U.S.A. only) Foot controller: Model J2 This foot controller can be used for this machine model PC8500. Editing Embroidery Patterns Retrieving My Custom Stitch TM Error Maintenance Messages Trouble shooting Sewing Chart Patterns (Programmed in Machine) Patterns (Memory Card) 22