Brother International PC-8500 Users Manual - English - Page 73
Dart Seam, other end without stretching the fabric.
View all Brother International PC-8500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
Setting Up Sewing Utility Stitches Characters and Decorative Stitches Embroidering DART SEAM J 1. Attach presser foot "J". Sew a reverse stitch at the beginning of the dart and then sew from the wide end to the 1 other end without stretching the fabric. 1 Basting * If automatic reinforcement stitching is preset, a reinforcement stitch will automatically be sewn at the sewing start. 2. Do not sew a reverse stitch at end. Cut the thread at the end leaving 5 cm (1-15/16"), and then tie both ends together. 3. Insert the ends of the thread into the dart with a needle. 4. Iron the dart to one side so that it is flat. Editing Embroidery Patterns Retrieving My Custom Stitch TM Error Maintenance Messages Trouble shooting Sewing Chart Patterns (Programmed in Machine) Patterns (Memory Card) 70