Brother International RJ4040-K RuggedJet w/WiFi Battery User Guide - Page 35

3 RJ Utility 3 Overview 3 The RJ Utility is a computer program that allows you to change the printer's default settings. Normally when using a computer program to print a document, print settings are specified in the printer driver's dialog box and then the data is sent to the printer. This utility can be used to adjust settings that are more advanced than the printer driver's settings. Use the RJ Utility to configure the printer only when the printer is idle. The printer may malfunction if you attempt to configure it while it is handling a job. Using the RJ Utility 3 Before Using the RJ Utility 3  Connect the printer to an AC or DC power outlet, or make sure that the battery is fully-charged.  Make sure that the printer driver has been installed and is functional.  Connect the printer to a computer via USB or Bluetooth (RJ-4030 only). Starting the RJ Utility 3 a Connect the printer to be configured to the computer. b Click [Start] - [All Programs] - [Brother] - [Label & Mobile Printer] [Printer Setting Tool]. The [Printer Setting Tool] screen is displayed. c Select the printer connected in step a. d Click the [Utility] button. The main window is displayed. (See Main Window uu page 32.) How to Use the RJ Utility 3 3 a In the main window of the RJ Utility, select the check boxes of the parameters with settings that can be changed. b Select the desired settings from the pull-down menus or enter the desired values. c Click [Apply] to save the settings in the printer. Note The settings are saved when you quit the RJ Utility, and the settings are applied the next time the RJ Utility is started. Note, however, that if the printer is already connected when the RJ Utility is started, the printer's settings are applied. 31