Brother International Z-8550A Instruction Manual - English - Page 42
Setting start backtacking (8560A, 8550A-A31 only), <Setting start backtacking>
View all Brother International Z-8550A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
6. USING THE OPERATION PANEL (BASIC OPERATIONS) 6-2-6. Setting start backtacking (8560A, 8550A-A31 only) After thread trimming (or after the treadle has been depressed backward for the 8550A-A31), you can sew a set number of stitches to create start backtack stitches. (2 stitches) (6 stitches) (2 stitches) (6 stitches) (6 stitches) The stitch length for section A is adjusted by means of the stitch length dial (1), and the stitch length for section B is adjusted by means of the condense dial (2). 3434M 1445M 1 1446M Example: NOTE: This operation is possible after thread trimming has been carried out (after the treadle has been depressed backward for the 8550A-A31). 3435M 2 Depress the treadle to start sewing the start backtack stitches. After this, stitches will be sewn at the pitch set by the stitch length dial (1). NOTE: • The sewing machine will continue operating until the set number of start backtack stitches has been sewn, even if the treadle is returned to the neutral position. (The sewing machine operates at a speed of 1,200 rpm when sewing start backtack stitches.) • Stop in the needle up stop position at that point. (For the 8560A, the thread will be trimmed and then the needle will stop in the needle up stop position.) (If the zigzag stop position has been set, the needle will stop in the set position.) 2159M The condition changes as shown below each time the start backtack key is pressed. Illuminate Off Zigzag width/Zigzag base line position Number of start backtack stitches Z-8550A, 8560A Zigzag width/Zigzag base line position 3436M 34