Brother International Z-8550A Instruction Manual - English - Page 87
Error code displays, Set DIP switch No.4 to OFF.
![]() |
View all Brother International Z-8550A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 87 highlights
15. TROUBLESHOOTING 15-2. Error code displays 1. Make a note of the error code and then turn off the power. 2. After the operation panel display has turned off, eliminate the cause of the error and then turn the power back on. 3559M Items with a "*" in the "Page" column should only be checked by a qualified technician. Error code Err 50 (Safety switch operated) Possible cause • Is the machine connector 14P inside the control box disconnected? Insert the connector securely. Page 11* • Is the machine head tilted back? Return the machine head to its normal position. 3560M Err 65 (Panel key problem) • Was the power switch turned on while a key on the operation panel was being pressed? Alternatively, there may be a malfunction of the operation panel that makes it seem like a key is still being pressed. Press the power switch once more and check the operation panel. If the error still appears, contact the place of purchase. * Err 90 • Is the treadle unit connector 4P inside the (Treadle unit not connected) control box disconnected? Insert the connector securely. * Err 95 (Treadle error) Err 100 (GrEASEUP) Err 101 (diP SW 4) 3561M • Was the power turned on while the treadle was still depressed? Return the treadle to the neutral position, and then turn on the power switch. • This appears on the display when the sewing machine has continued to be used for a certain period after the "GREASEUP" notification appears without the grease being applied (without the reset procedure being carried out). Apply grease and then carry out the reset procedure. 52* • Is DIP switch No.4 inside the control box set to ON? Set DIP switch No.4 to OFF. * 3562M 79 Z-8550A, 8560A
![](/manual_guide/products/brother-international-z8550a-instruction-manual-english-72b346d/87.png)