Brother International Z-8550A Instruction Manual - English - Page 66
the reverse lever 9 lowered all the way with the, For models/specifications other than the 8550A-031
![]() |
View all Brother International Z-8550A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
11. REPLACING PARTS 6. Check that the feed dog does not touch the needle plate both when the reverse lever (9) is not lowered and when it is lowered. If it touches, adjust the forward/back installation position (centering) of the feed dog. 3502M [A] 7. Without lowering the reverse lever (9), move the stopper (5) up until it touches F-regulator connecting rod (10), and then tighten the screw (3). (Fig. A) 3503M [B] 8. With the reverse lever (9) lowered all the way, move the stopper (6) down until it touches the F-regulator connecting rod (10), and then tighten the screw (4). (Fig. B) 3504M 9. For models/specifications other than the 8550A-031, with the reverse lever (9) lowered all the way (with the plunger (11) of the quick reverse solenoid moved to its highest position), touch the quick reverse solenoid (2) against section (A) of the plunger (11), and then tighten the two screws (1). 3505M Z-8550A, 8560A 58
![](/manual_guide/products/brother-international-z8550a-instruction-manual-english-72b346d/66.png)