Brother International Z-8550A Instruction Manual - English - Page 44
Setting continuous backtacking (8560A and 8550A-A31 only)
![]() |
View all Brother International Z-8550A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
6. USING THE OPERATION PANEL (BASIC OPERATIONS) 6-2-8. Setting continuous backtacking (8560A and 8550A-A31 only) You can carry out continuous backtacking for the set number of stitches at the sewing start after thread trimming has been carried out (after the treadle has been depressed backward for the 8550A-A31). 1 Example: NOTE: This operation is possible after thread trimming has been carried out (after the treadle has been depressed backward for the 8550A-A31). 3440M 2 When the treadle is depressed, continuous backtacking is carried out, and then the sewing machine stops in the needle up position. (For the 8560A, thread trimming is carried out automatically and then the sewing machine stops in the needle up position.) NOTE: If the indicator of the thread trimming lock key is illuminated, the sewing machine will stop in the needle up position without thread trimming being carried out (for the 8560A). 2159M When the AUTO key is pressed so that the AUTO function is turned on, continuous backtacking is completed just by depressing the treadle once, without keeping it depressed. 2147M The status changes as follows each time the continuous stitch key is pressed. Illuminated Off Zigzag width/zigzag base line position No. of continuous backtack stitches Zigzag width/zigzag base line position 3441M Z-8550A, 8560A 36
![](/manual_guide/products/brother-international-z8550a-instruction-manual-english-72b346d/44.png)