Campbell Scientific 10525 ENC10/12, ENC12/14, ENC14/16, ENC16/18 Enclosures - Page 10

Mounting Equipment Inside the Enclosure, 3.1 Enclosures with One or Two 1.5\

Get Campbell Scientific 10525 PDF manuals and user guides View all Campbell Scientific 10525 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 10 highlights

ENC10/12, ENC10/12R, ENC12/14, ENC14/16, ENC16/18, PWENC12/14, PWENC14/16, and PWENC16/18 3. Mounting Equipment Inside the Enclosure 3.1 Enclosures with One or Two 1.5" Conduits 1. If installing the optional Door Switch Indicator, follow the procedure described in Appendix A. 2. If installing the 25458 or 28532 DIN-Rail Terminal Kit, follow the procedure described in Appendix B. The 25458 kit facilitates wiring when many wires need to be connected to one terminal. 3. If installing the 28960 Stack Mounting Kit, follow the procedure described in Appendix C. The 28906 kit allows components to be raised 3 in above the back plate, allowing one component to be stacked above another to save space. Raising a component from the back plate is also done to improve access to a component that may be partially blocked by other, taller equipment mounted in the enclosure. FIGURE 3-1. Securing components to the enclosure backplate NOTE Remember to allow space for cables and cable connectors. 4

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
ENC10/12, ENC10/12R, ENC12/14, ENC14/16, ENC16/18, PWENC12/14, PWENC14/16, and PWENC16/18
3.
Mounting Equipment Inside the Enclosure
3.1
Enclosures with One or Two 1.5" Conduits
1.
If installing the optional Door Switch Indicator, follow the procedure
described in Appendix A.
2.
If installing the 25458 or 28532 DIN-Rail Terminal Kit, follow the
procedure described in Appendix B.
The 25458 kit facilitates wiring when
many wires need to be connected to one terminal.
3.
If installing the 28960 Stack Mounting Kit, follow the procedure described
in Appendix C.
The 28906 kit allows components to be raised 3 in above
the back plate, allowing one component to be stacked above another to
save space.
Raising a component from the back plate is also done to
improve access to a component that may be partially blocked by other,
taller equipment mounted in the enclosure.
FIGURE 3-1.
Securing components to the enclosure backplate
Remember to allow space for cables and cable connectors.
NOTE
4