Campbell Scientific 10525 ENC10/12, ENC12/14, ENC14/16, ENC16/18 Enclosures - Page 27
Primer and White Paint, Spray with primer that is compatible with fiberglass.
View all Campbell Scientific 10525 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
ENC10/12, ENC10/12R, ENC12/14, ENC14/16, ENC16/18, PWENC12/14, PWENC14/16, and PWENC16/18 CAUTION 3. Use a fine grain sandpaper to gently sand the enclosure surface; if the surface of the enclosure is sufficiently rough, this step may be skipped. 4. Spray with clear acrylic paint. Properly ventilate the area while using solvent and paint. Wear safety goggles, mask, and gloves while sanding. 6.2 Primer and White Paint 1. Use a rag and possibly a solvent to clean the outside of the enclosure. Solvents that can be used include rubbing alcohol, a water solution of alkaline or caustic salts, domestic cleaning products such as Spic & Span, aromatic hydrocarbon solvents (benzene, xylene), butyl acetate, and glycol acetate. 2. If a solvent was used, carefully rinse and dry enclosure. 3. Use a fine grain sandpaper to gently sand the enclosure surface; if the surface of the enclosure is sufficiently rough, this step may be skipped. 4. Spray with primer that is compatible with fiberglass. 5. Paint the enclosure with a white paint that is compatible with fiberglass and resistant to extreme weather. The paint must be white because the white color reflects solar radiation. CAUTION Properly ventilate the area while using solvent and paint. Wear safety goggles, mask, and gloves while sanding. 21