Campbell Scientific 10525 ENC10/12, ENC12/14, ENC14/16, ENC16/18 Enclosures - Page 13
Enclosures with Individual Compression Fittings,
View all Campbell Scientific 10525 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
ENC10/12, ENC10/12R, ENC12/14, ENC14/16, ENC16/18, PWENC12/14, PWENC14/16, and PWENC16/18 FIGURE 3-3. An ENC12/14 with one 1.5" conduit houses a CR1000 datalogger and BP24 power supply. Door not shown. 3.2 Enclosures with Individual Compression Fittings 1. If installing the optional Door Switch Indicator, follow the procedure described in Appendix A. 2. Use the #6 screws and plastic grommets (FIGURE 3-1A) to mount additional peripherals to the enclosure backplate (FIGURE 3-1B). Dataloggers, power supplies, and most peripherals are usually attached to the backplate prior to shipment from the factory or are supplied with additional screws and grommets. To insert the grommet, push the points of the flanges into the center of any square hole. To remove a grommet without damage, remove the enclosure backplate and use pliers to pinch the grommet flanges together. NOTE Remember to allow space for cables and cable connectors. 7