Campbell Scientific CR1000KD CR800 and CR850 Measurement and Control Systems - Page 102

Section 7. Installation • Current Program displays the current program known to be running in the datalogger. This value is empty if there is no current program. • The Last Compiled field displays the time when the currently running program was last compiled by the datalogger. As with the Current Program field, this value is read from the datalogger if it is available. • Last Compile Results shows the compile results string as reported by the datalogger. • The Send Program button presents an open-file dialog box from which to select a program file to be sent to the datalogger. The field above the button is updated as the send operation progresses. When the program has been sent the Current Program, Last Compiled, and Last Compile Results fields are filled in. Figure 42: DevConfig Logger Control tab 7.6.3.2 Settings via CRBasic Some variables in the Status table can be requested or set during program execution using CRBasic commands SetStatus() and SetSecurity(). Entries can be requested or set by setting a Public or Dim variable equivalent to the Status table entry, as can be done with variables in any data table. For example, to set a variable, x, equal to a Status table entry, the syntax is, x = Status.StatusTableEntry 102