Campbell Scientific CR1000KD CR800 and CR850 Measurement and Control Systems - Page 514

Appendix B. Status Table and Settings Table 117. Status-Table Fields and Descriptions Fieldname Description Variable Type Beacon Array of Beacon intervals (in seconds) for comms ports. Aliased to: BeaconRS-232 BeaconME BeaconSDC7 BeaconSDC8 BeaconSDC10 BeaconSDC11 BeaconCOM1 BeaconCOM2 Integer array of 9 Default Range 0 0 - approx. 65,500 Edit? Yes Info Type Config PB Verify Array of verify intervals (in seconds) for com ports. Aliased to VerifyRS-232 VerifyME VerifySDC7 VerifySDC8 VerifySDC10 Integer array of 9 0 VerifySDC11 VerifyCOM1 VerifyCOM2 0 - approx. 65,500 Status MaxPacketSize USRDriveSize IPInfo IPAddressEth IPGateway TCPPort Maximum number of bytes per data collection packet. _ Configures the USR: drive. If 0, the drive is removed. If Integer non-zero, the drive is created. Indicates current parameters for IP connection. String Specifies the IP address for the Etnernet interface. If specified as zero, the address, net mask, and gateway are configured automatically using DHCP. Entered as String / Stored as 4 byte Specifies the address of the IP router to which the CR800 will forward all non-local IP packets for which it has no route. Entered as String / Stored as 4 byte Specifies the port used for Ethernet socket communications. Long 1000 0 0.0.0.0 0.0.0.0 6785 8192 Min Yes All valid IP addresses Yes All valid IP addresses Yes 0 - 65535 Yes Mem 514