Campbell Scientific CR1000KD CR800 and CR850 Measurement and Control Systems - Page 511

Appendix B. Status Table and Settings Table 117. Status-Table Fields and Descriptions Fieldname Description Variable Type ProcessTime Processing time (μs) of the last scan. Time is measured from the end of the EndScan instruction (after the measurement event is set) to the beginning of the EndScan (before the wait for the measurement event begins) for the subsequent scan. Calculated dynamically (on the fly). Integer MaxProcTime Maximum time (μs) required to run through processing for the current scan. This value is reset when the scan exits. Calculated dynamically (on the fly). Integer BuffDepth Shows the current Pipeline Mode processing buffer depth., which indicates how far processing is currently behind measurement. MaxBuffDepth Gives the maximum number of buffers processing lagged measurement. LastSystemScan8 The last time the background calibration executed. Integer array LastSlowScan9 The last time SlowSequence scan(s) executed. Integer array SystemProcTime8,12 The time (μs) required to process the background calibration. Integer array SlowProcTime9,12 The time (μs) required to process SlowSequence scan(s). Integer array MaxSystemProcTime8, The maximum time (μs) 13 required to process the background calibration. Integer array The maximum time (μs) MaxSlowProcTime9,13 required to process SlowSequence scan(s). Integer array PortStatus Array of Boolean values posting the state of control ports. Values updated every 500 ms. Boolean array of 8 PortConfig Array of strings explaining the use of the associated control port. Valid entries are: Input, Output, SDM, SDI-12, Tx, and Rx. String array of 8 SW12Volts Status of switched, 12-Vdc port Boolean Default Range Edit? Yes Reset by changing to 0 False True or False Yes Input False Input or Output True or False Yes Info Type Status Status Status Status Status Status Status Status Status Status Status 511