Campbell Scientific CR1000KD CR800 and CR850 Measurement and Control Systems - Page 505

Appendix B. Status Table and Settings The CR800 Status table contains system operating-status information accessible via the external keyboard / display (p. 545), DevConfig (p. 92), or datalogger support software (p. 76). Table Common Uses of the Status Table (p. 505) lists some of the more common uses of Status-table information. Table Status-Table Fields and Descriptions (p. 506) is a comprehensive list of Status-table registers with brief descriptions. Status-table information is easily viewed in Station Status in the datalogger support software. However, be aware that information presented in Station Status is not automatically updated. Click the refresh button each time an update is desired. Alternatively, use the numeric displays of the Connect screen to show critical values and have these update automatically, or use DevConfig, which polls the Status table at regular intervals without use of a refresh button. Note A lot of communications bandwidth and activity are needed to generate the Status table, so if the CR800 is very tight on time, just getting the Status table itself repeatedly could push timing over the edge and cause skipped scans. Through the continued development of the operating system, the Status table has become quite large. A separate settings table has been introduced to slow the growth of the Status table. To maintain backward compatibility, settings first included in the Status table have been retained, but are also included in the Settings Editor in DevConfig (p. 92). Table 116. Common Uses of the Status Table Feature or Suspect Constituent Status Field(s) to Consult Full Reset of CR800 FullMemReset (Enter 98765) Program Execution BuffDepth MaxBuffDepth Operating System OSVersion OSDate OSSignature WatchdogErrors Power Supply Battery WatchdogErrors Low12VCount Low5VCount StartUpCode SRAM LithiumBattery MemorySize MemoryFree Telecommunications PakBusAddress Low5VCount 505