Canon Canon EOS Rebel S Instruction Manual - Page 15
Loading, Removing
UPC - 805529880344
View all Canon Canon EOS Rebel S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Loading and Removing Film How to Load Film When a film is loaded, it is wound completely to the end. Then as each photograph is taken, the film rewinds frame by frame. The number of photographs remaining out of the total on the roll of film is continually displayed. The film has a DX code attached to, allowing the film speed to be set automatically. • If your film has no DX code on it, the film speed must be set manually. Please read the section "Changing the Film Speed Setting" on page 47. 1. Release the command dial lock by setting to any position other than PI . 2. Open the back cover by raising the back cover latch. 3. Insert the film as shown in the pic- C=1 ture, placing one end in first. A F al The shutter curtain is an extremely high precision mechanism and must never be touched. When loading film, be careful not to allow your fingers or the tip of the film to come in contact with the shutter curtain, as this can cause damage. 15