Canon Canon EOS Rebel S Instruction Manual - Page 61

IV. OTHER INFORMATION AF control system AF working range S AF auxiliary light Shutter Shutter speed Self-timer Film Loading Film Wind Rewind S Built-in flash Flash contacts Batteries Battery capacity check Size Weight CI) One-shot autofocus/stops on completion or release on completion possible. (2) Al Focus/One-shot autofocus, switches automatically to Al Servo. a) Manual/with the focus mode switch on M, manual focussing is possible. EV 1.5-18 (at ISO 100 standard chart) Automatically emitted. Vertical-travel, focal plane shutter with all speeds electronically controlled. 1/2000-30 sec. and bulb.X-synchro on 1/90 sec. (1/2 increment settings possible). Electronically controlled. (with about 10 second delay) Automatic. After film loading and back cover closure, the film automatically winds to the end of the roll and stops. , Automatic film wind: (1) Single shot. 2, Continuous shooting (up to a maximum of about one frame per second). Automatic rewind. Rewind in mid roll possible. Retractable type TTL automatic flash housed in pentaprism. Bypass control system. I, Guide number /12 (ISO 100 m ) .',2) Recycling time approx. 2 sec. a) Flash coverage angle: cover the angle of view of .a 28mm lens. X-sync contact, which connects directly to the accessory shoe. 2 lithium CR123A/DL123A batteries Can be checked by setting the command dial to any setting outside the special mode zones. 145 (W) x 92 (H) x 61.9 (D) mm About 315 g, or 350 g with the built-in flash (Body only and excluding two CR123A/DL123A lithium batteries). 61