Canon Canon EOS Rebel S Instruction Manual - Page 59

IV. OTHER INFORMATION 1. Remove the batteries, wipe the battery terminals and reload them. Check the batteries again. If the bc indicator still appears, replace the batteries with new ones. 2. Release the shutter once. If the bc indicator goes out, the problem is corrected and you can continue using the camera normally. If the bc indicator does not stop, the camera needs to be examined by an authorized Canon service facility. 3) Lithium Battery Information Always check the batteries at the following times: 1. When loading new batteries 2. After lengthy storage 3. If the shutter will not release 4. In cold weather 5. Before an important shooting assignment Battery Use Information • Wipe the battery terminals with a clean, dry cloth to ensure proper con- tact. • The batteries may explode or cause burns if disassembled, recharged, shorted, exposed to high temperatures, or disposed of in fire. Be sure to observe all precautions indicated on the battery package. Always keep it out of the reach of children. • Battery performance deteriorates slightly in temperatures below 0°C. Keep the camera and especially a spare battery close to your body or in an inside pocket to keep it warm until use. • Remove the batteries if you do not expect to use the camera for more than three weeks. 4) Camera Operation with Low Batteries Even if the bc indicator appears in the LCD panel during battery check, exposure will be okay as long as the shutter releases. Film advance and rewind will be impaired by insufficient battery power. Please replace the batteries with new ones. 59