Canon Color imageCLASS 8180c imageCLASS MF8180c Facsimile Guide - Page 53
Receiving When an Answering Machine Is Connected: AnsMode
View all Canon Color imageCLASS 8180c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
4 Press [ (-)] or [ (+)] to select ➞ press [Set] twice. 5 Press [ (-)] or [ (+)] to select the time 0 to 30 seconds that the machine takes to check whether a call is fax or voice call ➞ press [Set] twice. 6 Press [ (-)] or [ (+)] to select the length of time 15 to 30 seconds that the machine rings when the call is a voice call ➞ press [Set] twice. Receiving Faxes 7 Press [ (-)] or [ (+)] to select whether the machine switches to receive mode or disconnects the call if no one answers a voice 5 call after the specified time in step 6 ➞ press [Set]. You can select from the following: - to switch to receive mode - to disconnect the call 8 Press [Stop/Reset] to return to the standby display. Receiving When an Answering Machine Is Connected: AnsMode If you want to select , check the following: ■ Select This Mode If: • you only have one telephone line for both fax and telephone use. • you want to receive faxes automatically and receive voice messages on your answering machine. ■ You Will Need to: set . (See "Setting the Receive Mode," on p. 5-1.) NOTE Follow the guidelines below to adjust the answering machine: - Set the answering machine to answer on the first or second ring. - The entire message should be no longer than 15 seconds. - In the message, tell your callers how to send a fax. 5-4 Setting the Receive Mode