Canon Color imageCLASS MF9280Cdn imageCLASS MF9280Cdn/MF9220Cdn Basic Operatio - Page 423

Basic Scanning Operations 6 Start the TWAIN-compliant application to select Color Network ScanGear as the scanner to be used. - The command names for this operation includes [Select a scanner], [Select a device], etc. depending on the application you are using. For details, see the documentation that comes with the application software used. - For the operation procedures for starting the Color Network ScanGear driver to scan images from an application software, see "Scan," in the e-Manual. You will find the operation procedures using Microsoft Word 2007 and 2003. 7 From the menu of the application software, select the command to start the Color Network ScanGear driver. The command names for this operation includes [New scan], [Import from TWAIN source], etc. depending on the application you are using. For details, see the documentation that comes with the application software used. 8 On the Color Network ScanGear [Main] sheet, select [Platen], [Feeder (1-sided)], or [Feeder (2-sided)] from [Original Placement] according to the location of the original placed in step 5. If [Platen] is selected, clicking on [Preview] allows you to see the preview image of your scan. 9 On the [Main] and [Options] sheets, select the desired settings for Color Mode, Resolution, etc. When you select the command to start the Color Network ScanGear driver, and if it does not start and an error message such as "Scanner is not connected." appears, check if all the setups are complete for scanning originals from a computer. (See "Introduction to Using Scanner Functions," on p. 8-4.) For more information on the settings on each sheet, see the Online Help (displayed when the Help icon on the toolbar is clicked). Scanning 8-12