Canon DIGISUPER 60 xs manual for XJ100x9.3B AF XJ100x9.3B XJ95x12.4B XJ95x8.6B - Page 114
Setting the iris close detection to ON/OFF, Setting the tally lamp ON/OFF
View all Canon DIGISUPER 60 xs manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 114 highlights
[Iris]- Close Setting the iris close detection to ON/OFF This iris cannot be closed when the extender (2.0x) is inserted while the iris correction function is set to ON. To compensate for this, a function which closes the iris when iris close has been detected can be set. Top screen TAL Setting the tally lamp ON/OFF Top screen [Zoom]- Movement Setting the zoom servo start characteristics Start Setting the zoom servo stop characteristics Stop Setting the zoom mechanism end stop characteristics End Top screen × 2, Zoom screen Iris screen × 3 or to select (to set to ON) * This appears and iris close detection takes effect when ON is selected as the Comp setting (iris correction). *(Note): Depending on the camera, it may not be possible for the iris to operate properly due to the interaction between the iris correction function of the lens and the iris control exercised from the camera. At such a time, set the iris close detection to OFF. Selection item ON OFF Function Iris close detection No iris close detection Default value: This is set according to the camera interface at the factory prior to shipment. Selection item Function or to select (flashing) (to set to OFF) (D) ON Lighted OFF Extinguished (D): Default value Movement screen Selection item Function E6 to set the servo start characteristics to set the servo stop characteristics to set the mechanism end stop characteristics (to set the servo start characteristics) to adjust (to set to "48") 00 - 99 Slow start Quick start Servo start characteristics default value: 50 Servo stop characteristics default value: 50 Mechanism end stop characteristics default value: 99