Canon DIGISUPER 60 xs manual for XJ100x9.3B AF XJ100x9.3B XJ95x12.4B XJ95x8.6B - Page 42
Storage, To The Customer
View all Canon DIGISUPER 60 xs manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
* (NOTE) 1. Dust or fingerprints on the lens surface Gently blow or brush away dust or dirt on the lens surface using a lens blower or a soft lens brush. Remove any fingerprints or other stains with a soft clean cotton cloth moistened with lens cleaning fluid or lens cleaning paper (Shilbon paper, etc.). Gently swirl the cloth or paper over the lens surface. Start first at the center area of the lens and rub with a circular motion, then gradually shift the circle until whole lens surface has been covered. Be careful not to rub dust across the lens, as the lens surface may be scratched. 2. Periodic inspection A periodic inspection (about once a year) is recommended. The inspection and maintenance interval depends on the operating conditions, the frequency of use, and the environment. If required, overhaul the lens. CANON INC. 30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan Canon Europe Ltd 3 The Square, Stockley Park, Uxbridge, Middlesex, UB11 1ET UK All rights reserved. No part of this operation manual may be reproduced or copied in any from or by any means without the written permission of Canon Inc. STORAGE CAUTION 1. Always attach the hood cap and the dust cap before storing the lens. Storing the lens without these caps attached may present a fire hazard due to light convergence effect. * (NOTE) 1. If moisture enters the lens due to mist or light rain, etc., immediately wipe away any water with a dry cloth and then seal the lens in a vinyl bag together with a desiccant (as fresh as possible) to completely remove the moisture from inside the lens. TO THE CUSTOMER 1. Canon shall bear no responsibility for damage resulting from improper operation of this product by the customer. 2. Canon shall make no guarantees about the product quality, functions, or operation manual and its marketability and suitability for the customer's purpose. Moreover, Canon shall bear no responsibility for any damage, direct or incidental, that results from usage for the customer's purpose. 3. Canon shall make no guarantees about the results obtained using this product. 4. The product specifications, configuration, and appearance are subject to change without prior notice. 5. For further information on repairs, maintenance, or adjustments not mentioned in this operation manual, contact your Canon dealer or your Canon sales representative. 6. Note that Canon may be unable to undertake servicing or repair of a product if it is modified without consulting Canon or your Canon sales representative.