Canon DIGISUPER 60 xs manual for XJ100x9.3B AF XJ100x9.3B XJ95x12.4B XJ95x8.6B - Page 51
Trimmer Adjustment, Making Adjustments on the, Information Display
View all Canon DIGISUPER 60 xs manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
Trimmer Adjustment 1 Remove the lens shroud from the lens body. 2 Check that DIP switch (iris control select switch) SW2 No. 4 is set to the "OFF" position (I.CAMERA). Depending on the command signals from the camera, the iris would not be set to auto iris mode although the switch was set to the "OFF" position. For details, refer to the "Iris mode" table in 2-5 "Iris Mode Setting (Option)". 3 Turn the iris gain adjusting trimmer for the gain adjustment. To increase the gain, turn the trimmer clockwise. To decrease the gain, turn the trimmer counterclockwise. Iris Gain Adjusting Trimmer 2 PREPARATION b. When the screen starts flushing by pushing the cursor button, move the (left) or (right) cursor button until the value to be set appears on the screen. Selection item Function 01 - 99 Minimum gain Maximum gain Default value: 50 (b) (b) I G : 50 I G : 51 * (NOTE) • To perform the gain adjustment while checking the iris operation, set the iris mode of the camera to the [AUTO] position. • To determine the maximum gain, set the trimmer at a level where no hunting occurs. c. Push the cursor button. This completes the adjustment. (c) DIP Switch For the detailed setting method, refer to the "Display Operation Manual" at the end of this Operation Manual. Making Adjustments on the Information Display 1 Perform "Trimmer Adjustment" steps 1 and 2. 2 Information display operation procedure: a. Push the DISPLAY switch to bring up the display. (a) Information Display DISPLAY switch Cursor button E9