Canon DIGISUPER 60 xs manual for XJ100x9.3B AF XJ100x9.3B XJ95x12.4B XJ95x8.6B - Page 54

2 PREPARATION 2-7 Incorporable Focus Servo Demand (Option) The optional incorporable focus servo demands are offered for some types of camera. 1 Remove the lens shroud from the lens. 2 Set the focus demand selection switch to the "CAM" position. * (NOTE) This switch is usually set to the "LENS" position by default. STD (Standard mode): FAR (Far mode): NEAR (Near mode): The Standard mode has the characteristics where the relationship between the rotation amount of the control knob and the moving amount of the focus lens group is almost in linear. The Far mode facilitates focusing on an object in the far end, by making the far end curve characteristics gentle to increase the far end resolution. This mode is useful when shooting an object in comparatively far distance in sports events, for example. Contrary to the Far mode, the Near mode facilitates focusing on an object in the near end, by making the near end curve characteristics gentle to increase the near end resolution. This mode is useful when shooting an object in a limited space such as a studio. Focus Demand Selection Switch Focus Damand Characteristics Curve Selection Switch (Only models without information display) Information display 3 Set the focus demand characteristics curve mode on the informaiton display. One mode can be selected among the following three curves. For the detailed setting method, refer to the "Display Operation Manual" at the end of this Operation Manual. Users of models without the information display can select the mode with the focus demand characteristics selection switch. Focus position Infinity Close range Far mode Standard mode Near mode Knob position E12