Canon HV30E Instruction Manual - Page 84
Problem, Solution, Trouble?
View all Canon HV30E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
84 Trouble? Problem Solution Video noise appears on screen. When using the camcorder in a room where a plasma TV is - located, keep a distance between the camcorder and the plasma TV. Video noise appears on the TV When using the camcorder in a room where a TV is located, - screen. keep a distance between the compact power adapter and the power or antenna cables of the TV. The tape stops during record To protect the tape and video heads, the camcorder will enter - pause or playback pause. the stop mode ( ) if left in playback pause ( ) or record pause ( ) mode for 4 minutes 30 seconds. To resume the playback press START/STOP (when recording) or / (during playback). Horizontal bands appear on the This is a phenomenon typical of CMOS image sensors when - screen. recording under some types of fluorescent, mercury or sodium lamps. To reduce the symptoms set the mode switch to . When a subject flits across in This is a phenomenon typical of CMOS image sensors. When a - front of the lens, the image subject crosses very quickly in front of the camcorder, the image appears slightly bent. may seem slightly warped. Recording Problem Solution Image will not appear on the Set the camcorder to . 24 screen. "SET THE TIME ZONE, DATE Set the time zone, date and time. 22 AND TIME" appears on the screen. Recharge the built-in lithium battery and set the time zone, date 92 and time. Pressing the START/STOP Set the camcorder to . 24 button will not start recording. Load a cassette. 18 Tape reached the end (" END" appears on the screen). 18 Rewind the tape or replace the cassette. Cassette is protected (" " flashes on the screen). Change the 91 position of the protect switch. Camcorder will not focus. Autofocus does not work on that subject. Focus manually. 47 If you are using the viewfinder, adjust it with the dioptric 19 adjustment lever. Lens is dirty. Clean the lens with a soft lens-cleaning cloth. 93 Never use tissue paper to clean the lens. If you are using the optional Wide-converter or Tele-converter, 35 set [AF MODE] to [NORMAL AF]. Sound is distorted. When recording near loud sounds (such as fireworks or - concerts), sound may become distorted. You may be able to record the audio correctly by manually 59 adjusting the audio recording level or by setting [MIC ATT.] to [ON]. Viewfinder picture is blurred. Adjust the viewfinder with the dioptric adjustment lever. 19