Canon MP970 MP970 series Quick Start Guide - Page 21
Paper Feed Switch, Rear Tray, Prepare to load paper., Load the paper. - drivers windows 7
UPC - 013803081183
View all Canon MP970 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
2 Prepare to load paper. (1) Open the Sheet Feeder Cover and pull out the Paper Support. Put your finger in the rounded indent of the Paper Support and pull it out until it stops. (2) Open the Paper Output Tray. Put your finger in the center of the top of the Paper Output Tray and open it gently. (3) Open the Output Tray Extension. (4) Press the Paper Feed Switch so that the Rear Tray lamp (A) lights. Note You can also select the paper source with the printer driver. For details, refer to the PC Printing Guide on-screen manual. 3 Load the paper. (1) Load the paper in the Rear Tray with the print side facing UP. (2) Align the paper stack against the Cover Guide on the right side of the Paper Support. Note Make sure that the Cover Guide is set upright when you load paper in the Rear Tray. (A) (4) (B) (1) (3) (2) (3) (1) (2) (3) Pinch the Paper Guide and slide it against the left side of the paper stack. Important Do not slide the Paper Guide too hard. The paper may not be fed properly. Do not load higher than the Load Limit Mark (B). 4 Specify the page size and media type settings according to the loaded paper. Note z When performing copy direct printing without using a computer, select the size and type of the loaded paper in Page size and Media type in each mode. For details on settings in each mode, see "Setting Items" on page 25 and page 30. z When using the machine connected to a computer, select the size and type of the loaded paper in Page Size (or Paper Size) and Media Type in the printer driver. For details on printer driver settings, see "Printing with Windows" on page 40 or "Printing with Macintosh" on page 41. Before Using the Machine 17