Canon N2000 User Guide - Page 32
Move the width guide until it rests lightly against the side of the stack.
![]() |
View all Canon N2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
z To avoid paper jams, make sure that the trailing edge is aligned square with the length guide, and make sure that the edges at (d) are straight and not slanted. d z Wait for all of the paper or other print media in the cassette to be used up before loading more paper. z Never mix different types of paper or other print media in the same stack. z When printing transparencies, always load one sheet of plain paper the same size as the transparencies on the bottom of the stack. 7 Move the width guide until it rests lightly against the side of the stack. Important z To ensure smooth paper feed from the cassette, make sure that the width guide is snug and not too tight against the side of the stack. If the width guide is too tight, or if there is a gap between the paper and the guide, this may cause paper to feed incorrectly. 8 Install the cassette cover. Align the four pegs on bottom of the cassette cover with the holes in the cassette below and set the cover on the cassette. 2-10 Print Media You Can Use
![](/manual_guide/products/canon-n2000-user-guide-7ff27c7/32.png)