Canon N2000 User Guide - Page 85
Printer not Operating Correctly, Cannot Print
![]() |
View all Canon N2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 85 highlights
Printer not Operating Correctly Check the following items when the printer does not operate and will not print. Cannot Print Printer not switched on. Problem 1: Power button not switched on. Solution: Press the Power button again to confirm that the Online lamp, Message lamp, and operation panel light. (ÆP.1-7) Problem 2: Power cord not supplying power to the printer. Solution: Confirm that the power cord connections at the printer and the power supply are tight. (ÆSetup Guide, Chapter 1, "4 Connect the Power Cord") Problem 3: Power supply not providing power. Solution: Connect another device to the power supply to confirm that the outlet is providing power. If not supplying power, check the breaker switches for the power line. If you are on a power strip, determine if there is a switch between the plug receptacle and the main power line. Problem 4: Power cord broken. Solution: Call for service and request a new power cord. Printer is on but not online. Problem 1: Printhead is not installed. Solution: Install the printhead. (ÆSetup Guide, Chapter 1, "5 Install the Printhead") Problem 2: Ink tank(s) are not installed. Solution: Confirm that all ink tanks are installed. (ÆSetup Guide, Chapter 1, "6 Install the Ink Tanks") Problem 3: A cover is open. Solution: Close the cover named in the message displayed on the operation panel. Problem 4: Printer is still warming up. Solution: Immediately after the printer is switched on, it cannot print because it needs a several seconds to warm up. After switching on the printer, you must wait for the Online lamp to light and remain on. Printer not Operating Correctly 6-3
![](/manual_guide/products/canon-n2000-user-guide-7ff27c7/85.png)