Canon N2000 User Guide - Page 90
Black or White Streaks Visible., Problem 2, Solution
![]() |
View all Canon N2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 90 highlights
correct, stop the print job, select the correct setting, then start the print job again. (ÆP.2-7) Problem 2: Print media is curled or creased. Solution: Remove the creasing or curling then start the print job again. Black or White Streaks Visible. Problem 1: Printhead is out of alignment. Solution: When printing on plain paper, use the printer operation panel to perform band adjustment with the "Band Adjust" item. (ÆP.6-29) Problem 2: The amount of paper feed from the paper cassette that fed is incorrect. Solution: On the operation panel, change the "LF Adjust" setting, then print the image that produced the white lines. Check the printout, then fine adjust the amount of feed. Adjust the amount of feed for each paper cassette. (ÆP.4-8, P.4-11) 6-8 Troubleshooting
![](/manual_guide/products/canon-n2000-user-guide-7ff27c7/90.png)