Canon Optura 40 OPTURA40 OPTURA30 Instruction Manual - Page 131
Trimming Settings
UPC - 013803040906
View all Canon Optura 40 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 131 highlights
Trimming Settings Set the print style before you start with the trimming settings. E 1. In the print setting menu, turn the SET dial to select [TRIMMING] and press the SET dial. The trimming frame appears. 2. Change the size of the trimming frame. W • Move the zoom lever toward T to shrink the frame, and T toward W to enlarge the frame. • To cancel the trimming settings, move the zoom lever toward W until the trimming frame disappears. 3. Move the trimming frame. T • Turn the SET dial to move the frame. Press the SET dial to switch between the directions (up/down or right/left) and the orientation of the frame (vertical/horizontal). • Pressing the MENU button brings you back to the print settings menu. ❍ About the color of the trimming frame (Canon CP-Printers only): - White: No trimming settings. - Green: Recommended trimming size. (The trimming frame may not appear in green depending on the image size, paper size or borders settings.) - Red: The image is magnified beyond recommended size. The image may print out coarsely. ❍ The trimming setting applies only to one image. ❍ The trimming setting is canceled with the following operations: - When you turn off the camcorder. - When you disconnect the interface cable. - When you expand the trimming frame beyond its maximum size. Direct Printing 131