Canon Optura 40 OPTURA40 OPTURA30 Instruction Manual - Page 33

Adjusting the Volume When you use the LCD screen for playback, the camcorder plays back the sound via built-in speaker. The speaker does not sound when you close the LCD panel. Use E headphones when using the viewfinder. SET dial H (phones) terminal Speaker Basic Functions Playback When Using Headphones The headphones terminal also serves as AV terminal. Headphones can only be used when "H" is displayed on the screen. If not, change the setting following the procedure below. CAMERA PLAY (VCR) CARD CAMERA CARD PLAY ( 37) VCR SETUP AV/PHONES ••AV Open the menu and select [VCR SETUP]. Select [AV/PHONES H ], set it to [PHONES H ] and close the menu. ❍ The speaker does not sound when "H" is displayed. ❍ Do not connect headphones unless "H" is displayed as it produces noise. Adjusting the Volume CAMERA PLAY (VCR) CARD CAMERA CARD PLAY Turn the SET dial up to increase the volume, and down to lower the volume. • A volume bar appears for 2 seconds. • You can turn off the volume completely by turning the SET dial down until [OFF] appears. Turn the SET dial up to increase the volume again. 33