Canon Optura 40 OPTURA40 OPTURA30 Instruction Manual - Page 62

Wind Screen, Using Headphones during Recording

Page 62 highlights

Wind Screen The camcorder reduces wind noise automatically. However, you can turn off the wind screen when recording indoors, or when you want the microphone to be as sensitive as possible. CAMERA PLAY (VCR) * * Only when [AUDIO DUB.] is set to [MIC IN]. CARD CAMERA CARD PLAY ( 37) AUDIO SETUP WIND SCREEN••AUTO Open the menu and select [AUDIO SETUP]. Select [WIND SCREEN], set it to [OFF] and close the menu. "WS |" appears when you turn the wind screen off. The wind screen function can only be used with the built-in microphone. Using Headphones during Recording The headphones terminal also serves as AV terminal. Headphones can only be used when "H" is displayed on the screen. If not, change the setting following the procedure below. CAMERA PLAY (VCR) CARD CAMERA CARD PLAY ( 37) VCR SETUP AV/PHONES ••AV Open the menu and select [VCR SETUP]. Select [AV/PHONES H ], set it to [PHONES H ] and close the menu. Adjusting the Headphone Volume CAMERA PLAY (VCR) CARD CAMERA CARD PLAY ( 37) AUDIO SETUP HVOLUME Open the menu and select [AUDIO SETUP]. Select [ H VOLUME], adjust the volume with the SET dial and close the menu. You can turn off the volume completely by turning the SET dial down until [OFF] appears. Turn the SET dial up to increase the volume again. 62

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166

62
Wind Screen
The camcorder reduces wind noise automatically. However, you can turn off the wind
screen when recording indoors, or when you want the microphone to be as sensitive
as possible.
Open the menu and select [AUDIO SETUP]. Select [WIND SCREEN], set it to
[OFF] and close the menu.
“WS
|
” appears when you turn the wind screen off.
The wind screen function can only be used with the built-in microphone.
Using Headphones during Recording
The headphones terminal also serves as AV terminal. Headphones can only be used
when “
H
” is displayed on the screen. If not, change the setting following the
procedure below.
Open the menu and select [VCR SETUP]. Select [AV/PHONES
H
], set it to
[PHONES
H
] and close the menu.
Adjusting the Headphone Volume
Open the menu and select [AUDIO SETUP]. Select [
H
VOLUME], adjust the
volume with the SET dial and close the menu.
You can turn off the volume completely by turning the SET dial down until [OFF] appears.
Turn the SET dial up to increase the volume again.
CARD PLAY
CARD CAMERA
PLAY (VCR)
CAMERA
CARD PLAY
CARD CAMERA
PLAY (VCR)
CAMERA
CARD PLAY
CARD CAMERA
PLAY (VCR)
CAMERA
VCR SETUP
AV/PHONES
••AV
(
37)
H
VOLUME•••••
AUDIO SETUP
(
37)
WIND SCREEN••AUTO
AUDIO SETUP
(
37)
*
Only when [AUDIO DUB.] is set to [MIC IN].
*