Canon PIXMA G620 G600 series User Manual - Page 133
Remove the carriage stopper C and insert it all the way into the hole in the printer side.
View all Canon PIXMA G620 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 133 highlights
The printer is turned off. 7. Check that ON lamp is off and unplug power cord. Important • Do not unplug the printer while the ON lamp is lit or flashing, as it may cause malfunction or damage to the printer, making the printer unable to print. 8. Open the scanning unit / cover again. 9. Remove the carriage stopper (C) and insert it all the way into the hole in the printer side. Pull the carriage stopper forward while pulling it up and insert it in the same orientation. 10. Close the scanning unit / cover. 11. Retract output tray extension and paper output tray. 12. Retract paper support. 133
The printer is turned off.
7.
Check that
ON
lamp is off and
unplug power cord
.
7.
Important
•
Do not unplug the printer while the
ON
lamp is lit or flashing, as it may cause malfunction or
•
damage to the printer, making the printer unable to print.
8.
Open the scanning unit / cover again.
8.
9.
Remove the carriage stopper (C) and insert it all the way into the hole in the printer side.
9.
Pull the carriage stopper forward while pulling it up and insert it in the same orientation.
10.
Close the scanning unit / cover.
10.
11.
Retract output tray extension and paper output tray.
11.
12.
Retract paper support.
12.
133