Canon PIXMA G620 G600 series User Manual - Page 36

• When displaying the Security protocol, a screen appears asking whether to display the password at the same time. To display the password, select Yes. To not display the password, select No. • The password is required when connecting a device to the printer. Depending on the device you are using, no password is required. • When you connect a Wi-Fi Direct compatible device to the printer, select the printer name from your device. • To change the identifier (SSID) and the password, see below. Changing Wireless Direct Setting Connecting a smartphone/tablet/computer to the printer 1. Enable Wi-Fi function on smartphone/tablet/computer. Enable Wi-Fi in the Settings menu on your smartphone/tablet/computer. For instructions on enabling the Wi-Fi function, refer to the instruction manual for your smartphone/ tablet/computer. 2. Select "DIRECT-XXXX-G600series" ("X" represents alphanumeric characters) from list on your smartphone/tablet/computer. Note • If "DIRECT-XXXX-G600series" does not appear on the list, Wireless Direct is not enabled. See Changing Printer Setting to Use Wireless Direct to enable Wireless Direct. 3. Enter Password on smartphone/tablet/computer. The smartphone/tablet/computer is connected to the printer. Note • Check the password for the Wireless Direct. Check by one of the following methods. Display on the LCD of the printer. LAN settings Print the network settings. Printing Network Settings • Depending on the device you are using, entering the password is required to connect a device to the printer via Wi-Fi. Enter the password specified for the printer. • If the printer is set to display a confirmation screen in Confirm request of Changing Wireless Direct Setting, when the wireless direct compatible device connects to the printer, a confirmation screen asking for permission to connect is displayed on the printer LCD. 36