Canon PIXMA MG2920 User Manual - Page 141

• If the print head alignment sheet was not printed correctly, press the Stop button, then redo this procedure from the beginning. 5. Scan the print head alignment sheet to adjust the print head position. 1. Load the print head alignment sheet on the platen glass. Load the print head alignment sheet WITH THE PRINTED SIDE FACING DOWN and align the mark on the bottom right corner of the sheet with the alignment mark . 2. Close the document cover gently, then press the Black button or the Color button. The machine starts scanning the print head alignment sheet, and the print head position will be adjusted automatically. The print head position adjustment will be complete when the ON lamp lights after flashing. Remove the print head alignment sheet on the platen glass. Important • Do not open the document cover or move the print head alignment sheet on the platen glass until adjusting the print head position is complete. • If adjusting the print head position has failed, the Alarm lamp flashes. Press the Black button or the Color button to release the error, then take appropriate action. If an Error Occurs Note • If the print results are still not satisfactory after adjusting the print head position as described above, adjust the print head position manually from the computer. Aligning the Print Head Position from Your Computer • To print and check the current head position adjustment values, hold down the Stop button until the Alarm lamp flashes six times, then release it immediately. 141