Canon PIXMA MG2920 User Manual - Page 210

Using the Card Slot over a Network Note • This screen is not available depending on the printer you are using. Mounting the Card Slot as the Network Drive Restrictions on Card Slot Use over a Network Mounting the Card Slot as the Network Drive The card slot must be mounted to use it over a network. To mount the card slot as the network drive, follow the procedure below. 1. Insert a memory card into the card slot of the machine. 2. Check the current printer name. You can check the current printer name on the LCD of the printer. 3. On Finder, click the Go menu and Connect to Server. 4. Input "smb://xxxxxxxxxxxx/canon_memory/", then click Connect. For example, if the current printer name is "123ABC000000", then input "smb://123ABC000000/ canon_memory/". 5. Make sure that the card slot is mounted. When the card slot is mounted, the following icon appears on the desktop or in the Computer window on the Go menu of Finder. Note • The authentication screen may appear. If it appears, you do not need to input the password. • If you cannot mount the card slot with the method above, input the IP address of the machine instead of the current printer name, and try again. For example, "smb://192.168.1.1/ canon_memory/". If you mount the card slot with the IP address, you have to remount it whenever the machine's IP address changes. Restrictions on Card Slot Use over a Network • You cannot write data to a memory card in the card slot over a network. You can only read data from a memory card. 210