Canon PIXMA MG2920 User Manual - Page 185
Alarm
View all Canon PIXMA MG2920 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 185 highlights
Printing Out Network Setting Information You can print out the current network settings of the machine. Important • This print out contains valuable information about your computer. Handle it with care. 1. Make sure that the printer is turned on. 2. Load a sheet of A4 or Letter-sized plain paper. 3. Press and hold the Stop button until the Alarm lamp flashes 15 times. 4. Release the Stop button. The machine starts printing the network setting information. The following information on the machine's network setting is printed out. Item Explanations of the item Setting Wireless LAN Wireless LAN Enable/Disable Connection Connection status Active/Inactive MAC Address MAC Address XX:XX:XX:XX:XX:XX SSID SSID SSID of the wireless LAN/SSID of the access point mode Password Password Password of the access point mode (8 to 10 alphanumeric characters) Communication Mode Communication Mode Infrastructure/Access Point Mode Channel *1 Channel XX (1 to 13) Encryption Method of the Encryption none/WEP/TKIP/AES WEP Key Length WEP Key Length Inactive/128/64 Authentication Method of the Authentication none/auto/open/shared/WPA-PSK/WPA2-PSK Signal Strength Signal Strength 0 to 100 [%] TCP/IP Version TCP/IP Version IPv4 & IPv6/IPv4 IPv4 IP Address Selected IP Address (IPv4) XXX.XXX.XXX.XXX IPv4 Default Gateway Default Gateway (IPv4) XXX.XXX.XXX.XXX Subnet Mask Subnet Mask XXX.XXX.XXX.XXX IPv6 IP Address *2 Selected IP Address (IPv6) XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX 185