Canon PIXMA MG2920 User Manual - Page 430

2. Check that the paper is now flat. We recommend printing curl-corrected paper one sheet at a time. Note • Depending on the media type, the paper may be smudged or may not be fed properly even if it is not curled inward. In such cases, follow the procedure described below to curl the paper outward within 0.1 inch / 3 mm (B) in height before printing. This may improve the print result. (C) Printing side We recommend printing paper that has been curled outward one sheet at a time. Check4 If the intensity is set high, reduce the intensity setting and try printing again. If you are using plain paper to print images with high intensity, the paper may absorb too much ink and become wavy, causing paper abrasion. Reduce the intensity setting in the printer driver and try printing again. 1. Open the Print dialog. How to Open the Printer Driver Setup Window 2. Select Color Options in the pop-up menu. 3. Drag the Intensity slide bar to set the intensity. Check5 Is printing performed beyond the recommended printing area? If you are printing beyond the recommended printing area of your printing paper, the lower edge of the paper may become stained with ink. Resize your original document in your application software. Printing Area Check6 Is the platen glass dirty? Clean the platen glass. Cleaning the Platen Glass and Document Cover Check7 Is the paper feed roller dirty? Clean the paper feed roller. Cleaning the Paper Feed Roller 430