Canon PIXMA MG2920 User Manual - Page 408

The Message Is Displayed on the Computer Screen During Setup The Enter Password Screen Is Displayed During Setup The Screen for Setting the Encryption Is Displayed After Selecting the Access Point in the Access Points Screen "You are connecting the machine to the non encrypted wireless network" Is Displayed The Enter Password Screen Is Displayed During Setup The following screen is displayed if an administrator password is set to the machine which has already been set up to use via a network. Enter the administrator password you have set. Note • An administrator password is already specified for the machine at the time of purchase. For details: About the Administrator Password For improving security, it is recommended to change the administrator password. Changing the Settings in the Admin Password Sheet The Screen for Setting the Encryption Is Displayed After Selecting the Access Point in the Access Points Screen This screen is displayed automatically if the selected access point is encrypted. In this case, configure the details to use the same encryption settings set to the access point. For information on the encryption settings, see Changing the Settings in the Wireless LAN Sheet. "You are connecting the machine to the non encrypted wireless network" Is Displayed Security is not configured on the access point. The machine can still be used, so continue the setup procedure to complete it. Important • If you connect to a network that is not protected with security measures, there is a risk of disclosing data such as your personal information to a third party. 408